Advanced Functions and Settings ♦
C4 - 14
THIS OPERATION
RESETS THE PLOTTER!
CONTINUE>
CANCEL>
SET EXPAND LIMIT
0 mm
DEFAULT>
ROLL-1>
ROLL-2>
SHEET>
ORIGIN>
AREA>
EXPAND>
PAGE LENGTH>
Press the UP or DOWN ARROW key to select the
value.
Press the F4 key to select DEFAULT (0).
Press the ENTER key to store your setting, the
following menu will appear.
If the F4 key is pressed, return to the previous menu.
Press the F3 key to select CONTINUE.
Press the F4 key to select CANCEL.
If the CONTINUE is selected, the MEDIA TYPE MENU will
appear. Select the media type you wish to use.
Press the F1 key to select ROLL-1.
Press the F2 key to select ROLL-2.
Press the F3 key to select SHEET.
If the CANCEL is selected, return to the previous menu .
Press the MENU key to cancel MENU mode.
To Next Page
Loading...
