Advanced Functions and Settings ♦
C4 - 21
SCALE
SCALE FACTOR = 1
ROTATE>
MIRROR>
SCALE>
INTERFACE>
AREA PARAMETERS>
FUNCTION 1>
FUNCTION 2>
SCALE – Enlarging and Reducing an Image Size
This function sets the SCALE factor for enlarging or reducing an image to be cut or plotted.
Press the MENU key to select MENU mode.
Press the NEXT key.
Press the NEXT key again.
Press the F3 key to select FUNCTION 1.
Press the F4 key to select SCALE.
Press the UP or DOWN ARROW keys to select the
desired SCALE factor within the magnification range
of 1/8, ¼, ½, 1, 2, 3, 4, 5, 6, 7, and 8.
Press the ENTER key to register your settings.
Press the MENU key to cancel MENU mode.
To Next Page
Loading...
