RCS User Manual
103
PID not referred to by a PMT or a CAT within 0,5
s
Sections of the current SDT table not present in
the TS in a period of time longer than the
threshold
Found tables different to SDT, SDT2, BAT or ST
in the packets with PID 11
The interval of time between two consecutive
sections of the SDT table is shorter tan
threshold
The SDT table does not exist. The search time
is showed in the alarm 3.5.A.1
The interval between two equal sections of the
SDT table (other) is greater than the threshold
Section 0 of the current EIT table is not present
for a longer time than the threshold
Section 1 of the current EIT table is not present
for longer time than the threshold
Found tables with TID out of range 4e – 6f or 72
in packets with PID 12
The interval of time between two consecutive
sections of the EIT table is shorter than
threshold
EIT table does not exist and it should
Section 0 of the EIT2 table (other) is not present
for a period of time longer than the threshold
Section 1 of the EIT2 table (other) is not present
for a period of time longer than the threshold
If either section (‘0’ or ‘1’) of each EIT P/F
subtable is present both should exist. Otherwise
this error will be indicated
Found a table different to RST or ST in the
packets with PID 13
The interval of time between two consecutive
sections of the RST table is shorter than
threshold
The interval between any two sections of the
DTT table is greater than the threshold
Found a table different to DTT, ST or TOT table
in packets with PID 14
The interval of time between two consecutive
sections of the TDT table is shorter than
threshold
TDT table does not exist. The search time is
shwed in the alarm 3.8.A.1
TB buffer not flushed at least once per second
Tbsys buffer not flushed at least once per
second
MB buffer not flushed at least once per second
Data delay through buffers is greater than 1
second
To Next Page
Loading...
Need help?
General
