Gsertel RCS 100 User Manual

RCS User Manual
30
1.3.2.- ASI
This feature allows to assign an alarms profile to each ASI input (see section 1.5.1.- Alarms
Profiles).
For each channel of the plan, the user must select a profile for each type of alarm: ASI, ETR290,
Services and PID Blacklist. If the RCS has “user_default” profiles (see section 1.3.1.- Alarms
Profiles), these are the profiles assigned by default to all the channels of the plan. If the RCS has
not “user_selection” profiles, then the profiles assigned by default are the “Factory default” ones.
You can also assign the factory default profiles to all the channels. To do that, please press the
“Restore Factory Default Profiles”.
If you want to assign the same profiles to all the channels, please press the “Bulk Configuration”
button.
Warrning: When the user selects a frequency that doesn’t belong to any of the
channels of the plan (so it has not any Alarms profiles assigned to it), the last
alarms profiles used will be applied automatically

Gsertel RCS 100 Specifications

General

Brand	Gsertel
Model	RCS 100
Category	Microphone
Language	English