Gsertel RCS 100 User Manual

RCS User Manual
29
To edit a RF channel plan you must export it to a .CSV file, make the changes in the .CSV file and
then import it to the RCS. Note: the information about the alarms profile won’t be exported/imported
to the .CSV file.
For each channel of the plan, the user must select a profile for each type of alarm. To do that, click
on the “Edit profile” button, a popup window will be open. This window allows to select the
corresponding profiles to all the types of alarms (RF, ETR290, Services and PID) for each RF input:
If the RCS has “user_selection” profiles (see section 1.5.1.- Alarms Profiles), these are the profiles
assigned by default to all the channels of the plan. If the RCS has not “user_selection” profiles, then
the profiles assigned by default are the “Factory default” ones.
You can also assign the factory default profiles to all the channels. To do that, please press the
“Restore Factory Default Profiles”.
If you want to assign the same profiles to all the channels, please press the “Bulk Configuration”
button, so a popup window will be open:

Gsertel RCS 100 Specifications

General

Brand	Gsertel
Model	RCS 100
Category	Microphone
Language	English