Gsertel RCS 100 User Manual

RCS User Manual
33
VLAN Table Editor
You can edit the VLAN table by using the VLAN selecting the New/Edit option in the VLAN ID field
of any channel of the list:
If you select New/Edit option, a new window will be open with the VLAN list:
You must provide an unique unicast IP address to each VLAN. The network interface that you
select in the corresponding field of the channel (TSoIP1/TSoIP2) will use this IP address. So, the
same VLAN can’t be assigned to both network interfaces.
The channel features are explained below:
Save Changes: Saves the changes made to the channel list. If you don’t click on this button, the
changes will not be applied to the plan.
New Channel: Adds a new channel to the plan.

Gsertel RCS 100 Specifications

General

Brand	Gsertel
Model	RCS 100
Category	Microphone
Language	English