© Guldmann GB/US-09/2016 • #550376_3
165
CONTROL
Checklist
1. Is the sling’s label present, legible and
complete?
Check for missing, illegible or incomplete sling
label(s). This could compromise identification of
an appropriate size of the sling, function of sling,
and or weight limit capacity of the sling
2. Are the lifting straps and stitches intact?
Check for broken or worn stitches
Check for knots in straps
Check for tears or fraying of straps
Check for snags or punctures or holes
Check for any particles in fabric of straps
3. Is the fabric intact?
Check for abnormal wear patterns, excessive wear,
abrasive evidence
Check for cuts or frayed fabric
Check for unusual or significant discoloration
Check for snags, punctures, tears, holes
Check for frayed or insecure seams
Check for any acid / caustic / thermal burns
Check for changes in material consistency,
e.g. increased stiffness
Check for any imbedded particles
4. Are slings the original size and length without
the use of knots, pins, tape or other methods to
change the shape, shorten or lengthen them?
Comments:
Inspection date:
Inspection by:
Periodic Inspection according
to DS/EN ISO 10535:2006
Guidance for 6-month inspection of slings
V. Guldmann A/S
Graham Bells Vej 21-23A
DK-8200 Århus N
Tel. +45 8741 3100
Fax +45 8741 3131
E-mail info@guldmann.com
www.guldmann.com
© Guldmann GB-1295/11/10
Sling Type: Serial Number:
Checklist
Slings
To Next Page
Loading...
