© Guldmann GB/US-09/2016 • #550376_3
69
SERVICE AND REPAIR
Taking the hoist down from rail Take a small flat head screw
driver and locate it in the slot of the side cover which is
found under the Guldmann logo.
Gently ease the side cover towards you and run the screw-
driver along the edge, this will remove the cover from the
slot.
Take the cover off from both sides using this technique.
When the side covers are removed you will see 2 metal
pins these can be pulled out, lift the pins and pull towards
you to remove the different types of trolleys.
GH1
Removing the side covers
To Next Page
Loading...
