© Guldmann GB/US-09/2016 • #550376_3
57
SERVICE AND REPAIR
GH3
552714_01 Motor AUX, Spare part
Connecting a 551278 Motor AUX PCB 2012 to 550396 MotorSafety pcb
The AUX pcb plugs directly into the MotorSafety pcb, no cables are needed.
NOTE: If it replaces the previous type 550201 Motor AUX PCB on a hoist with 1 drive motor, the cable to the drivemotor must
be replaced (the new cable is 5 cm. longer).
NOTE 2: All communication between MotorSafty pcb and AUX pcb is now in the green power connector J2/J6.
To Next Page
Loading...
