GDM-8261 User Manual
108
4. Move the cursor to the channel
using the Left/Right key, and
change the value using the
Up/Down key.
Range
101 ~ 118
5. When finished, press the Enter
key. The End (Maximum)
channel setting appears.
6. Move the cursor to the channel
using the Left/Right key, and
change the value using the
Up/Down key.
Range
101 ~ 118 (must be greater than or equal
to the Start (Min) channel)
7. When finished, press the Enter
key. The Timer setting appears.
8. Move the cursor to the timer
setting using the Left/Right key,
and change the value using the
Up/Down key.
Range
1ms ~ 9999ms
9. When finished, press the Enter
key. The Count setting appears.
Range
1 ~ 999
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
