Hamilton Jet HTX30 - After Sea Trials

HTX30 Product Manual
Appendix
8-33
At sea
Completed
 Throttle curve.

 Helm curve.

 Manoeuvring joystick controller control.

 Oil temperature during operation.

After 15 minutes:

After 1 hour:

 Check main bearing temperature during operation.

After 15 minutes:

After 1 hour:

 Port and starboard oil level.

 Port and starboard hydraulic leaks

 Port and starboard steering nozzle orientation.

 Port and starboard reverse duct orientation.

 Port and starboard steering deadband.

 Port and starboard reverse duct deadband.

 Verify JETanchor performance (if JETanchor is fitted) (► page 5-44).

 Use the blue ARROW Support Tool to perform a "Commit and tidy up" (►
page 5-28).

 Register the system (► page 5-28).

 Record all observed values.

After sea trials
After operation checks
Completed
 Port and starboard oil level.
