Hamilton Jet HTX30 - JIM Parameters

HTX30 Product Manual
Appendix
8-47
JIM parameters
Top level parameters
Name
SCP text
Description
Min
Max
Default
Units
Access
Software version
SWVer
U
Boot block software
version
BbVer
F
Backup software
version
BkVer
F
Amendment
Amend
U
PCB amendment
PCBAm
F
Jet model
JtMdl
The model number of the jet
0
10000
0
U
Jet type rev
JtRev
A revision number of the character param defaults for
this jet type
0
200
1
D
Steering enabled
Str / Enab
Enables the steering nozzle hydraulic control
0
1
1
D
Reverse enabled
Rev / Enab
Enables the reverse duct hydraulic control
0
1
1
D
Calibration type
Calib / Type
Sets the calibration type, either powered or unpowered:
Po = Powered
Un = Unpowered
U
Load ship values
Load
Copies the ship defaults to the user space, this brings
the parameters back to settings as used in
commissioning
U
Unpowered calibration group
Short name: Unpwr / Calib
Name
SCP text
Description
Min
Max
Default
Units
Access
Limit port
Str / Port
Calibrates the steering port limit
U
Limit stbd
Str / Stbd
Calibrates the steering stbd limit
U
Steering mid
Str / Mid
Calibrates the steering mid position
U
Limit up
Rev / Up
Calibrates the reverse up limit
U
Limit down
Rev / Down
Calibrates the reverse down limit
U
Zero speed
Zero / Spd
Calibrates the reverse zero speed position
U
Powered calibration group
Short name: Pwred / Calib
Name
SCP text
Description
Min
Max
Default
Units
Access
Deadband
port
DbPrt
Hydraulic valve deadband drive value,
when driving in the port direction
5
75
40
drive
U
Deadband
stbd
DbStb
Hydraulic valve deadband drive value,
when driving in the stbd direction
5
75
40
drive
U
Deadband up
DbUp
Hydraulic valve deadband drive value,
when driving in the up direction
5
75
40
drive
U
Deadband
down
DbDwn
Hydraulic valve deadband drive value,
when driving in the down direction
5
75
40
drive
U
Limit port
Lmt / Port
Steering feedback limit when fully to
Port
JPARAM_STR_P
ORT_MIN
0x600
(JPARAM_STR_PO
RT_MIN + 64 )
none
U
Limit stbd
Lmt / Stbd
Steering feedback value when fully to
Stbd
0xA00
JPARAM_STR_S
TBD_MAX
(JPARAM_STR_STB
D_MAX - 64 )
none
U
Steering mid
Mid
Steering feedback value when in centre
position, i.e. straight ahead
0x300
0xC00
0x800
none
U
Limit up
Lmt / Up
Reverse feedback value when fully in
the up position
0xA00
JPARAM_REV_
UP_MAX
(JPARAM_REV_UP
_MAX - 64 )
none
U
Limit down
Lmt / Down
Reverse feedback value when fully in
the down position
JPARAM_REV_
DOWN_MIN
0x600
(JPARAM_REV_DO
WN_MIN + 64)
none
U
Zero speed
Zero / Spd
Reverse feedback value equal thrust is
going forward and reverse, i.e the boat
is at zero speed
0x180
0xB00
0x600
none
U