Hamilton Jet HTX30 - Mouseboat Manoeuvring Controller

System Overview
HTX30 Product Manual
2-4
Mouseboat manoeuvring controller
Two types of Mouseboat Manoeuvring Controller are available, the standard Mouseboat and the JETanchor
Mouseboat.
Standard Mouseboat manoeuvring controller
Figure 1: Standard Mouseboat manoeuvring controller
Part number: 119004
 Allows simplified control of the vessel during docking or low speed manoeuvring.
 Allows the vessel's current thrust settings to be locked (allows current steering, reverse duct and engine
rpm settings to be automatically held).
 Connects in series with other control input devices to the station control panel.
 The standard Mouseboat is only available for twin jet installations.
JETanchor Mouseboat manoeuvring controller
Figure 2: JETanchor Mouseboat manoeuvring controller
Part number: 119003
 Allows simplified control of the vessel during docking or low speed manoeuvring.
 Allows the vessel's current thrust settings to be locked (allows current steering, reverse duct and engine
rpm settings to be automatically held).
 Allows the vessel's position to be automatically held around a virtual anchor point (virtual single-point
mooring).
 Connects in series with other control input devices to the station control panel.
 The JETanchor Mouseboat is only available for twin jet installations.