99
GB
• If the ash is used when the shutter button is pressed, a custom white balance is registered with the
ash light taken into account. Take pictures with the ash in later shootings.
• e message “Custom WB error” indicates that the value is beyond the expected range. (When the
ash is used on a subject in close proximity or a subject with a bright color is in the frame.) If you
register this value, the indicator turns yellow on the recording information display. You can
shoot at this point, but it is recommended that you set the white balance again to get a more accurate
white balance value.
Table of
contents
Table of
contents
Sample photo
Menu Index
Notes
To Next Page
Loading...
