98
GB
Effects of lighting conditions
e apparent color of the subject is aected by the lighting conditions.
e color temperature is adjusted automatically, but you can adjust color temperature
manually using the [White Balance] function.
1 MENU
[Brightness/Color]
[White Balance]
[Custom Setup].
2 Hold the camera so that the white area fully covers the AF area located
in the center, and then press the shutter button down.
e shutter clicks and the calibrated values (color temperature and color lter) are displayed.
3 To call the custom white balance setting, MENU
[Brightness/Color]
[White Balance]
[Custom].
You can nely adjust the color temperature with Option.
Weather/
lighting
Daylight Cloudy Fluorescent Incandescent
Characteristics
of light
White
(standard)
Bluish Green-tinged Reddish
Adjusting the color temperature finely
C.Temp./Filter
Custom white balance
1 MENU
[Brightness/Color]
[White Balance]
desired mode.
2 As necessary, Option
adjust the color temperature by pressing the
top/bottom/right/left parts of the control wheel.
You can adjust the color temperature towards G (green), M (magenta), A (amber) or B
(blue).
1 MENU
[Brightness/Color]
[White Balance]
[C.Temp./Filter].
2 Option
select the desired color temperature by turning the control
wheel.
e higher the number, the more reddish the image, and the lower the number, the
more bluish the image.
3 Adjust the color temperature by pressing the top/bottom/right/left
parts of the control wheel.
Table of
contents
Sample photo
Menu Index
Continued
To Next Page
Loading...
Need help?
General
