Why HIKVISION AX DS-PWA32-HSR failed to send mails to QQ or Foxmail?
If your HIKVISION Control Panel fails to send emails to QQ or Foxmail, it may be due to a wrong QQ account or password. Note that the password required for QQ account login is not the password used for normal login.
Why HIKVISION AX DS-PWA32-HSR Control Panel failed to send mail during use?
If your HIKVISION Control Panel fails to send mail during use, the mailbox server may have restricted access. Log in to the mailbox to see if the mailbox is locked.
How to fix failure in arming HIKVISION AX DS-PWA32-HSR?
If your HIKVISION Control Panel fails to arm (when the arming process is not started), it may be because the panel does not enable "forced arming". Turn on the "forced arming" enable, or restore the zone to the normal status.
Why HIKVISION AX DS-PWA32-HSR alarm clearing operation does not produce the alarm clearing report?
The HIKVISION Control Panel alarm clearing operation on the panel does not produce the alarm clearing report because, in the absence of alarm, no report will be uploaded for arm clearing.
Why HIKVISION AX DS-PWA32-HSR Control Panel failed to send test mail?
If your HIKVISION Control Panel fails to send a test mail, it is likely due to wrong configuration of mailbox parameters. Edit the mailbox configuration information as shown in table 1/1.
General| Brand | HIKVISION |
|---|---|
| Model | AX DS-PWA32-HSR |
| Category | Control Panel |
| Language | English |
Outlines terms and conditions for product use and liability, and lists trademarks.
Defines symbols indicating hazardous situations and potential risks.
Provides an overview of the AX security control panel's features and capabilities.
Lists available product models and their descriptions.
Illustrates and labels the components on the front of the control panel.
Details the indicators (AC Power, Alert, Link, Arm/Disarm, Alarm) on the front panel.
Illustrates how peripheral devices connect to the control panel.
Details the methods for connecting the control panel to devices.
Step-by-step instructions for removing the control panel's rear cover.
Instructions for inserting the SIM card and connecting the battery.
Steps for powering on the device and connecting to the network via Ethernet.
Guides the initial device activation process.
Details activation using web browser, client software, or SADP tool.
Configuration of wired network parameters.
Setup for cellular data network parameters using a SIM card.
Setting up parameters for the alarm receiving center.
Setting up notification push parameters for alarms and events.
Steps to register the device with the Hik-Connect mobile client.
Basic settings for configuring zones, including name and type.
Defines different zone types and their operational behaviors.
Configuring parameters for enrolled keypads.
Configuring parameters for enrolled card readers.
Linking zones to specific partitions.
Adding and managing network cameras for video monitoring.
Managing user accounts and permissions.
Managing keyfobs for system access.
Managing access cards for system access.
Performing system maintenance tasks like rebooting and upgrading.
Searching and filtering device logs.
Viewing the status of various system components.
Configuration of system options and authority management.
Configuring fault detection for various system components.
Configuring user account lockout parameters.
Instructions for using the Hik-Connect mobile client.
Activating the control panel using the Hik-Connect service.
Adding wireless peripherals to the control panel.
Adding access cards to the system.
Adding keyfobs to the control panel.
Managing user accounts and permissions.
Manually arming or disarming zones.
Controlling partition arming/disarming status.
Bypassing specific zones when the partition is armed.
Configuring zone settings, including name and type.
Scheduling automatic arming and disarming of zones.
Setting time durations for entry and exit delays.
Viewing system status via the mobile client.
Checking alarm notifications from the mobile client.
Adding and managing network camera channels.
Configuring event video settings.
Setting video parameters for events.
Linking cameras to zones for monitoring.
Procedures for arming the system.
Flowchart of the arming process and indicator status.
Details keyfob operations and their indications.
Explains keyfob operations, voice prompts, and LED indications.
Using cards to arm or disarm the system.
Instructions for using the client software.
Adding devices to the client software.
Adding devices via Cloud P2P account.
Controlling partitions via client software.
Enabling or closing relays via client software.
Enabling or closing sirens via client software.
Accessing and using the web client.
Managing access cards.
Managing keyfobs.
Managing user accounts.
Viewing the status of system components.
Troubleshooting communication issues.
Resolving IP address conflicts.
Troubleshooting web page accessibility issues.
Troubleshooting Hik-Connect offline status.
Troubleshooting frequent network camera disconnections.
Troubleshooting failure to add devices on the APP.
Troubleshooting missing alarm reports.
Troubleshooting function conflicts.
Troubleshooting zone faults.
Troubleshooting arming failures.
Troubleshooting general operational failures.
Troubleshooting issues with sending mail.
Troubleshooting mail delivery to QQ or Foxmail.
Troubleshooting mail delivery to Yahoo.
Provides details on mail server, SMTP port, and protocols.
Describes different input types and their operations.
Details Gas Zone input type and its operations.
Details Medical Zone input type and its operations.
Details Timeout Zone input type and its operations.
Details Disabled Zone input type and its operations.
Describes various output types and their behaviors.
Lists event types and their default notification settings.
Details user permissions based on access levels in EN standard.
Details user permissions based on access levels in basic standard.
To Next Page
