EasyManua.ls Logo

Hioki 3158 - Page 7

Hioki 3158
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
i
────────────────────────────────────────────────────
Introduction
────────────────────────────────────────────────────
NOTE
Introduction
Inspection
Thank you for purchasing the HIOKI "3158 AC WITHSTANDING VOLTAGE
HiTESTER". To obtain maximum performance from the product, please read this
manual first, and keep it handy for future reference.
When you receive the product, inspect it carefully to ensure that no damage
occurred during shipping. In particular, check the accessories, panel switches, and
connectors. If damage is evident, or if it fails to operate according to the
specifications, contact your dealer or Hioki representative.
Checking the main unit and accessories
Main unit
"3158 AC WITHSTANDING VOLTAGE HiTESTER."
Accessories
Verify that the following standard accessories are complete.
(1) Instruction Manual
1
(2) Spare fuse (built into the power inlet)
1
(3) Grounded three-core power cord
1
(4) 9615 H.V. TEST LEAD
(High voltage and return side )
1
Shipment of the unit
If reshipping the unit, preferably use the original packing.
Warranty
HIOKI cannot be responsible for losses caused either directly or indirectly by the
use of the 3158 with other equipment, or if ownership is transferred to a third party.
Before using the product, make sure that the insulation on the test leads is
undamaged and that no bare conductors are improperly exposed. Using the
product in such conditions could cause an electric shock, so contact your
dealer or Hioki representative for repair.

Table of Contents

Related product manuals