Hioki 3158 - Page 77

65
────────────────────────────────────────────────────
5.1 Saving Preset Values
────────────────────────────────────────────────────
1
2
3
5
7
8
9
10
11
12
13
14
A
Comparative voltage value OFF
Upper level value 100 mA
Lower level value 15 mA
Test time 8.0 s
(3) Use the / keys to select File No.3.
This example shows File No. 1. Press the
key twice to display File No.3.
(4) Use the
/ keys to check upper and lower level values.
In this example, File No. 3 contains the following settings.
(5) To save the data, press
SHIFT
+ keys. The unit reverts to the READY
state. Once saved, the value set in the READY state is retained in File No.3.
Note that File No.3, shown in Step (4) above, is deleted.
To abort the save procedure, press the
STOP
key at Step (4). The unit halts
the save procedure and reverts to the READY state.