Hioki BT3554-51 - Error Messages

130
FunctionSpecications
Saved items Measureddatacanbesavedinconnectionwithprole
information.
Measured data (Saving, reading out, and deleting data
are available by using the instrument)
1. Date and time
2. Resistance value, voltage value, temperature
3. Comparator threshold values, comparison result
Proleinformation(Saving,readingout,anddeleting
information are unavailable by using the instrument)
Saving, reading out, and deleting information are
available by using the computer application software
that comes with the instrument or through the Z3210.
1. Prolenumber:Numberbetween1and100
Numbers cannot be duplicated.
The following information consisting of items 2, 3,
and,4,aresavedforeachprolenumber.
2. Location information:
Strings at most 72 bytes in length
Example:
72 characters of one-byte alphabet and numbers
Any comment, such as the UPS location
3. Device information:
Strings at most 72 bytes in length
Example:
72 characters of one-byte alphabet and numbers
Any comment, such as the UPS control number.
4. Battery number: Number between 1 to 500 (start
number, last number)
Numbers assigned to objects under measurement,
which are used by the measurement recording
voice prompt
Saving location Saved in the internal non-volatile ROM.
How to save data See “5.2 Saving Data in the Memory” (p. 85).
HIOKI BT3554F961-00HIOKI BT3554F961-00