Hioki BT3554-51 - Page 145

131
FunctionSpecications
(11) Automatic memory
Operation Automatically saves the measured data once the
display has frozen the values.
After displaying the [USED] segment, automatically
increments the memory number by one.
The saved data can be deleted using the CLEAR key.
Display When the function is enabled:
The [AUTO MEMORY] segment appears.
Default setting Disabled
How to set See “5.3 Automatic Memory Function” (p. 87).
(12) Measurement recording prompt
Operation The visual prompt on the display and the voice prompt
inform the user about the battery number the user is to
measure next.
(The voice prompt, generated from a smart phone or a
tablet, is available when the Z3210 and the supported
application, GENNECT Cross are used)
Preliminary
preparation
StoretheproleinformationreceivedfromGENNECT
Cross / GENNECT ONE, which are the supported
applications (into the internal non-volatile ROM).
(Prolenumbers,batterynumbers,andmemory
numbers corresponding to the battery numbers are
necessary)
Default setting Disabled
How to start See “6 Measurement Recording Prompt Function”
(p. 95).
HIOKI BT3554F961-00HIOKI BT3554F961-00