6.1 Connecting the Printer
91
6
Chapter 6 Printing
Before connecting the printer
Recommended printer
The requirements for a printer to be connected to the instrument are as follows.
Confirm compatibility and make the appropriate settings on the printer before
connecting it to the instrument.
• Interface ................................ RS-232C
• Characters per line................ At least 45
• Communication speed .......... 9600 bps
• Data bits................................ 8
• Parity..................................... none
• Stop bits ................................ 1
• Flow control........................... none
• Control codes ........................ Capable of directly printing plain text
Printing Chapter 6
6.1 Connecting the Printer
Because electric shock and instrument damage hazards are present, always
follow the steps below when connecting the printer.
• Always turn off the instrument and the printer before connecting.
• A serious hazard can occur if a wire becomes dislocated and contacts
another conductor during operation. Make certain connections are secure.
• As much as possible, avoid printing in hot and humid environments. Other-
wise, printer life may be severely shortened.
• Use only compatible recording paper in the printer. Using non-specified
paper may not only result in faulty printing, but printing may become impos-
sible.
• If the recording paper is skewed on the roller, paper jams may result.
The optional printer model 9670 is no longer available. Their model 9670 printers
can still use.
To Next Page
Loading...
Need help?
General
