Hioki BT3561A User Manual

Verifying Package Contents
2
When you receive the instrument, inspect it carefully to ensure that no damage occurred during
shipping. In particular, check the accessories, panel switches, and connectors. If damage is evident,
or if it fails to operate according to the specifications, contact your dealer or Hioki representative.
Use the original packing materials when transporting the instrument, if possible.
Options The following options are available for the instrument. Contact your authorized
Hioki distributor or reseller when ordering.
The options are subject to change. Visit our website for updated information.
 Model L2107 CLIP TYPE LEAD (60 VDC or less)
 Model 9453 FOUR TERMINAL LEAD (60 VDC or less)
 Model 9467 LARGE CLIP TYPE LEAD (50 VDC or less)
 Model 9770 PIN TYPE LEAD (60 VDC or less)
 Model 9771 PIN TYPE LEAD (60 VDC or less)
 Model L2100 PIN TYPE LEAD (1000 VDC or less)
 Model L2110 PIN TYPE LEAD (1000 VDC or less)
 Model Z5038 0 ADJ BOARD (for model L2100 and L2110)
 Model 9637 RS-232C CABLE (9-pin to 9-pin/cross cable)
 Model 9638 RS-232C CABLE (9-pin to 25-pin/cross cable)
 Model 9151-02 GP-IB CONNECTOR CABLE (2 m)
 Model 9642 LAN CABLE
Verifying Package Contents
Confirm that these contents are provided. (One each)
 Model BT3561A BATTERY HiTESTER
Model BT3562 BATTERY HiTESTER
Model BT3562-01 (GP-IB version) BATTERY HiTESTER
Model BT3562A (LAN version) BATTERY HiTESTER
Model BT3563 BATTERY HiTESTER
Model BT3563-01 (GP-IB version) BATTERY HiTESTER
Model BT3563A (LAN version) BATTERY HiTESTER
 Instruction Manual
 Power Cord
 Operating Precautions (0990A903)
HIOKI BT3562A981-09

Hioki BT3561A Specifications

General

Brand	Hioki
Model	BT3561A
Category	Test Equipment
Language	English