222
Servicing
TURN OFF all the power switches.
(7) Release the bind lace and Nylon strap for the RC cover to remove.
NOTE:
1. When removing the RC cover, take special care not to deform the piping around the cover. The brazing parts may be
damaged due to pipe deformation.
2. When removing the RC cover, take special care not to be injured with the sheet metal edges or the heat exchanger ns.
3. The aluminium sheet is conductive. If the aluminium sheet is damaged, it may lead to failure due to electrical wiring
contact. To avoid such a failure, check the RC cover condition before xing the cover.
Direction to Remove the Cover
RC Cover
Compressor
To Next Page
Loading...
Need help?
General
