Hisense AVWT-192FFFH User Manual

289
Optional Function
Outdoor Unit
Capacity(kBtu/h)
db=9 db=8 db=7
Operating Noise
(Targeted Value)
Capacity
(Compared to
dB=0)
Operating Noise
(Targeted Value)
Capacity
(Compared to
dB=0)
Operating Noise
(Targeted Value)
Capacity
(Compared to
dB=0)
72 46db 70% 48db 80% 50db 90%
96 46db 50% 48db 60% 50db 70%
120 48db 50% 50db 60% 52db 70%
144 49db 50% 51db 60% 53db 70%
168 49db 40% 51db 50% 53db 60%
192 50db 40% 52db 50% 54db 60%
4.3.8 Demand Function Setting
Press “PSW3” and select the setting condition “0” to “5”, so that the demand function setting “ ” can be set. This function
is available by setting to “1” for the demand current control without inputting the signal to the external input terminal on the
outdoor unit PCB. The table below is shown for the limit of the operating current for this function.
NOTE:
In the case that the demand current control by external input is set and the external input signal is available, this function is
not available even when the demand current control by external input signal is performed.
Setting Condition Demand Running Current Control
0 Not Available (Default Setting)
1 40%
2 60%
3 70%
4 80%
5 100%
● Demand Control
Adopting self-demand function, which drastically decreases power consumption, has largely improved energy saving.
< NOTES at Facility Design >
1. The demand current control (%) is value criterion. The value used for this control is calculated from the current, and
therefore is di󰀨erent from the value indicated by a wattmeter. If it is required that the maximum power consumption is
managed precisely, a eld-supplied demand controller should be used.
2. The actual value may temporarily be higher than the indicated value shown above depending on the operating control
conditions such as protection control.
Maximum efficiency is secured
within the power setting range.
Operating Hours
Power Setting
Morning Daytime Night
Power Consumption
Selectable from 100%,
80%, 70%, 60% and 40% of
the rated power consumption
for cooling operation.
Excessive power supply consumption
exceeding the power setting range
is restricted.

Hisense AVWT-192FFFH Specifications

General

Brand	Hisense
Model	AVWT-192FFFH
Category	Air Conditioner
Language	English