8. MAINTENANCE OPERATIONS
8-21
(*1) These are displayed only in the B model.
[RAS Setting]
[Automatic shutdown setting]
Fan: ON
Temperature: OFF
Remote shutdown: ON
[Watchdog timer setting]
Retrigger type: Automatic
Timeout: 60 sec
Interval: 20 sec
[Drive failure prediction setting]
Function is available: Enable
[Drive used hours monitoring setting]
Function is available: Enable
[Advanced]
Time limit of drive bay1: 20000 hours
Time limit of drive bay2: 20000 hours
[Digital LED setting]
Show Hardware status: ON
[Popup setting]
Function is available: Disable
[Advanced]
Fan: Enable
Temperature: Disable
SMART: Disable
Used hours: Enable
RAID: Enable
(*1)
Memory: Disable
Hardware Status section
(Status of the equipment)
To Next Page
Loading...
Need help?
General
