2. OPERATION
2-25
(2) Configuring screen settings for two (multiple) displays
This equipment supports multiple display output. If you connect two displays, the two
displays can be used simultaneously. The following shows how to set up the multiple
display output.
1. As described in "(1) Configuring screen settings for a single display", start Intel® HD
Graphics Control Panel > Display.
2. Click Display at the upper left corner in the window, and then click Multiple
Displays. Then configure the settings for multiple displays.
The following shows how to set up “Clone”, “Extended” and “Collage”.
< NOTE >
・ The multi-stream function (daisy chain) of DisplayPort is not supported.
To Next Page
