Hitachi PXR-D User Manual

3-3 ● Setting Print Lines
Performing overall setup
¡ The entered number of lines will be set for all the columns.
¡ The selectable number of lines ranges from 1 to 4.
¡ The print format is used as the print item for the first column and applied
uniformly.
¡ To set "interlaced", set it collectively for convenience sake.
¡ Printing quality is better with "interlaced" than with "single scan".
¡ If the number of vertical dots within a column exceeds the maximum number
of dots, the following print format applies.
1
Line spacing
Character size
Increased width
Inter-character space
0 dot
5×8
1 dot
1x
Bar code
None
Character size
conditions: See Section
3.2, Setting Print
Format.
¡ Characters nonconforming to the character size conditions will be
printed as spaces.
NOTICE
(1) Overview
¡ Set the number of lines to print in each column.
¡ The number of lines that can be printed in each column is up to 4.
But the line for more than 24 items cannot be set.
¡ The number of lines for each column can be set in two ways; one is to set it
for all columns at a time and the other is to set it by each column.
3.1 Setting Print Lines
Performing setup on an individual column basis
¡ The entered number of lines is set for designated columns.
¡ When the number of lines is increased, new lines are added to the
lowermost line position.
¡ When the number of lines is decreased, the lowermost lines are deleted
accordingly.
¡ No changes are acceptable if the number of print items exceeds 24.
¡ The format for the lower most line prevailing before line addition applies
to newly added lines.
¡ It becomes "single scan" if set up column by column.
¡ If the number of vertical dots within a column exceeds the maximum
number of dots, the following print format applies.
2
¡ Characters nonconforming to the character size conditions will be
printed as spaces.
NOTICE
The available functions
and printable line count
and character size vary
from one model to
another. See Section
11.1, Printer
Specifications.
Line spacing
Character size
Increased width
Inter-character space
0 dot
5×8
1 dot
1x
Bar code
None
Interlaced prints:
See Section 3.4 (1) 4
¡ Print lines can be deleted or inserted.

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English