Hitachi PXR-D

6-6 ● Standard Communication Functions
6.3.2 Print Data Recall/Transmission
¡ In the example below, saved print data "VVVVVVVV" is recalled.
１ Let us suppose that the printer is ready.
》
Column 1 Column 2 Column 3
[０１２３４５６７８９] [・・・・・・・・・・] [・・・・・・・・・・]
[０１２３４５６７８９] [・・・・・・・・・・] [・・・・・・・・・・]
《
０１２３４５６７８９
０１２３４５６７８９
<Printings setup>
Item 1: Fixed character
Item 2: Fixed character
Print description
Message name
［ ］
2011.07.07 12:45
Manual
Maintenance
Auxiliary
function
Show fault
Menu
Prev.
col.
Next
col.
Print layout
Status:Ready Com=0
Start
up
Shut
down
Comm
On/Off
Operation
management
Environment
setup menu
<Printings setup>
Item 1: Calendar character
Item 2: Fixed character
》《
ABCDE
11．07．10
Column1 Column 2 Column 3
[ＹＹ．ＭＭ．ＤＤ・・] [・・・・・・・・・・] [・・・・・・・・・・]
[ＡＢＣＤＥ・・・・・] [・・・・・・・・・・] [・・・・・・・・・・]
Print description
Message name
［ VVVVVVVVVVVV ］
2011.07.07 12:45
Manual
Maintenance
Auxiliary
function
Show fault
Menu
Prev.
col.
Next
col.



Com=1
Print layout
Status:Ready
Start
up
Shut
down
Comm
On/Off
Operation
management
Environment
setup menu
2 Press the Comm On/Off key.
The status then changes from "off-line" to "on-line".
3 The external device transmits the "message number" of print data
to the IJ printer.
4 The printings change.
Shows text data between STX and ETX
ESC Header 0 1 2
Transmission data
Message number
1BH 56H 30H 31H 32H
Transmission code