Hitachi PXR-D - 4.4 Setting the Password

● Setting the Password 4-11
1
4.4 Setting the Password
(1) Overview
¡ You can set the password for the purpose of imposing restrictions on the
executable functions.
¡ A string of 1 to 12 characters can be accepted as the password.
¡ The acceptable password characters are 0-9 and A-Z.
¡ The current password cannot be changed until you type and enter it.
¡ The alphabetical characters used in the password are case-insensitive.
(2) Operating procedure
¡ Changing the password from AYZ02 to CZB05
Choose Environment setup menu from the maintenance menu.
Environment setup menu 2011.07.07 12:45
User environment
setup
Date/time setup
Communication
environment setup
Touch screen
setup
Password setup/
update
Back
Manual
Status: Stop Com=0
Start
up
Shut
down
Comm
On/Off
The "Environment setup menu" screen then opens.
2
Old password ［ ］
New password ［ ］
New password reentry ［ ］
1234567890
Back-
space
Password setup/update
2011.07.07 12:45
Cancel
OK
ABC・
abc・
↓
↑
→
←
Status: Stop Com=0
123・
Press Password setup/update .
The "Password setup/update" screen then opens.
Operations for
modifying the setting
contents
(See Section 2.1.3,
Operations for
modifying the setting
contents. )