Hitachi PXR-D - Status

● Operating Scheme 2-13
（2）The current status including the on-line/off-line (communication) state
is constantly displayed at the top of the screen.
2.3.2 Status
(1) The printer is in one of the following states.
No. State Description
1 Stop The ink is stopped. No deflection voltage is applied.
2 Standby The ink is ejected. No deflection voltage is applied.
3 Ready
The ink is ejected. The deflection voltage is applied (printing is
permitted by the sensor signal).
5
Starting
State in which the printer changes from the inactive state to
the standby state.
6
Ink heating Start up in process, with the ink being heated.
7
Drop adjust
Period during which ink particles are not properly charged in
the standby state.
8
Cover open
Period during which the nozzle head cover is open in the
standby state.
9
Service Circulation control process for maintenance task execution.
Fault
State in which a fault exists.
Status: Stop Com=0
Manual
Start
up
Shut
down
Comm
On/Off
Status: Stop Com=0
Warning : Ink Low Warning
Manual
Start
up
Shut
down
Comm
On/Off
（3） When a warning condition occurs, its description appears on the screen.
4