Hitachi PXR-D User Manual

8. If a Warning Condition/
Fault Occurs
● Indications Given When a Warning Condition/Fault Occurs 8-1
¡ When a warning condition or fault occurs, the warning or fault lamp comes on.
¡ A confirmation message appears to indicate an operating error or to prompt for
process judgment.
¡ If any "fault" occurs to incur a printing failure while the LCD backlight is
extinguished or if a "warning condition" occurs and calls for maintenance although
it does not invoke any printing failure, a window opens to display a fault message
or warning message.
¡ The following on-screen indications are given.
Operating status indicator lamps
PX
Ink Jet Printer
If a fault occurs
1
◆◆◆◆◆ＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸ◆◆◆◆◆
ＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸ
ＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸ
Cause ＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸ
ＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸ
Close
The name of the fault is displayed here.
A message of the fault is given here.
The cause of the fault is indicated here.
Clear
¡When you press Clear after eliminating the cause, the fault condition
clears and the message disappears.
¡When you press Close , the
fault window clears but the fault condition
persists.
¡However, if the
fault condition does not exist any longer, only the Close
key is displayed.
Entering a reset signal
will execute the same
action.( See Section
1.5.3-9, Input for remote
control signals.)
8.1 Indications Given When a Warning
Condition/Fault Occurs

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English