●Ink Specifications 11-2
11.2 Ink Specifications (JP-K67 Specifications)
(1) Color: Black
(2) Prime solvent: Methyl ethyl ketone (MEK)
(3) Use: Common plastics, paper, metal, glass, film, etc.
(4) Light resistance: No color fading occurs when accelerated light resistance testing is
conducted with a sunshine carbon weather meter for a period of 150
hours (equivalent to 1-year exposure to sunshine).
(5) Drying property: The drying time is about 1 to 2 seconds.
(6) Adhesive property: The adhesive property varies with the printed surface condition.
For confirmation purposes, view the sample prints (contact your
Hitachi distributor).
(7) Operating temperature range: See Section 1.2.1, "Notes on ink and makeup ink"
(8) Replacement periods
Operating hours: 600 to 1200 hours
Period: 6 months
*1 The ink must be replaced every 600 to 1200 hours of operation or six months,
whichever occurs first.
*2 Use the above values as a replacement guide only. The replacement periods
vary with the operating environment (temperature, humidity, dust, etc.).
(9) Other
¡
Inks contain organic solvents. So, they must be managed in compliance with all
appropriate regulations.
¡
Inks must be stored as flammable liquids. Storage must comply with local
regulatory requirements. Consult the appropriate regulatory agency for further
information.
¡
The ink must be hermetically sealed and stored in a cool dark place(0 to 20 ℃).
¡
Waste disposal must comply with all appropriate regulations. Consult the
appropriate regulatory agency for further information. Their empty containers must
also be disposed of in the same manner.
¡
Before using or handling ink, read the Material Safety Data Sheet(MSDS).
MSDS is available from your Hitachi distributor upon request.
To Next Page
Loading...
