Hitachi UX2 - Page 233

Chapter 9. Environment Setup
9-5
Chapter 9.
(e) [Dot matrix]
● Sets the size of characters to be used.
● The following sizes can be set.
Char. Size menu 1
5 x 8, 5 x 7
Char. Size menu 2
9 x 8, 9 x 7
(f) [Excitation V-ref. warning]
● This setting is used to enable or disable the [Excitation V-ref. Review] warning that occurs when the
difference between the current ambient temperature and the standard ambient temperature (ambient
temperature when the [Excitation V-ref.] value is updated) exceeds a certain value.
● The [Enable/Disable] setting differs depending on the ink type.
(g) [Month 3-digit code handling]
● Sets the print description when transmitting a month 3-digit code by print description transmission.
Numeric
Prints in numbers. (001, 002, 003...)
JAN, FEB, --
Prints by replacing with letters. (JAN, FEB, MAR...)
(h) [QR code printing]
● Please check if QR code / Micro QR code can be read properly by barcode reader before executing this
new function of "QR code printing".
Character
orientation
QR code printing
Printing example
Remarks
0 or 1
180-degree
rotation
Rotated by 180
degrees and printed.
Normal
Printed in normal
direction.
2 or 3
180-degree
rotation
Printed in normal
direction.
Normal
Rotated by 180
degrees and printed.