OPERATOR'S STATION
1-46
Armrest Adjustment
Armrest (6) can be pulled upright by hand to get on and
off the machine easily.
The angle of armrest (6) can be adjusted to the desired
position by turning adjusting dial (7) located on the bot-
tom of armrest (6).
Headrest
Headrest height and angle can be adjusted.
Pull headrest (8) upward or push downward to the de-
sired position. (Height adjustment range: 50 mm (2.0 in))
Headrest (8) can be adjusted 60 degrees forward from
the upright position. Move headrest by hands to the de-
sired angle.
M1G6-01-017
6
7
8
60 degrees
To Next Page
Loading...
