Hitachi ZW310 - Page 156


4-4


2-4N:
When the 1st gear stage is selected
→
drives in only the 1st gear.
When the 2nd gear stage is selected
→
drives in only the 2nd gear.
When the third gear stage is selected
→
drives in the 2nd and 3rd gears.
When the 4th gear stage is selected
→
drives in the 2nd, 3rd and 4th gears.
1-4L and 1-4H:
When the 1st gear stage is selected
→
drives in only the 1st gear.
When the 2nd gear stage is selected
→
drives in the 1st and 2nd gears.
When the third gear stage is selected
→
drives in the 1st, 2nd and 3rd gears.
When the 4th gear stage is selected
→
drives in the 1st, 2nd, 3rd and 4th
gears.
NOTE: When position (1-4L and 1-4H) is selected, the trans
-
mission is automatically shifted down to the first gear
stage according to increase in load.


L and N:
When the 1st gear stage is selected
→
drives in only the 1st gear.
When the 2nd gear stage is selected
→
drives in only the 2nd gear.
When the third gear stage is selected
→
drives in the 2nd and 3rd gears.
When the 4th gear stage is selected
→
drives in the 2nd, 3rd and 4th gears.
H:
When the 1st gear stage is selected
→
drives in only the 1st gear.
When the 2nd gear stage is selected
→
drives in the 1st and 2nd gears.
When the third gear stage is selected
→
drives in the 1st, 2nd and 3rd gears.
When the 4th gear stage is selected
→
drives in the 1st, 2nd, 3rd and 4th
gears.
NOTE: When position (H) is selected, the transmission is auto
-
matically shifted down to the first gear stage according
to increase in load.