5. Configuration and Function of Internal Memory
5.5. PUT/GET function block use area (parameter area)
100 Analog Input Module 2MLF-AV8A, AC8A User's Guide R200
Honeywell September 2010
B15 B14 B13 B12 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0
- - - - - - - - CH# filter constant
Address Description
_Fab_CH0_FILT_CONST CH0 filter constant setting
_Fab_CH1_FILT_CONST CH1 filter constant setting
_Fab_CH2_FILT_CONST CH2 filter constant setting
_Fab_CH3_FILT_CONST CH3 filter constant setting
_Fab_CH4_FILT_CONST CH4 filter constant setting
_Fab_CH5_FILT_CONST CH5 filter constant setting
_Fab_CH6_FILT_CONST CH6 filter constant setting
_Fab_CH7_FILT_CONST CH7 filter constant setting
At device allocation, ‘a’ means base number, ‘b’ means slot number where module is
equipped.
ATTENTION
For filter constant to be an effective value, enable the filter process.
To Next Page
Loading...
