32 MDR 710 – WWL Conveyor | Maintenance Manual | 29349817
November 16, 2020
4.2 Maintenance Precautions
You must read and understand these precautions completely before operating,
setting up, installing or performing maintenance on the equipment. Failure to
follow this instruction may result in serious personal injury and/or equipment
damage.
• When testing operating performance, do not start the equipment until all
operations and maintenance personnel are notified and clear of the unit being
tested.
• Be certain that required safety guards are never removed without authorization.
• Never run the equipment under production conditions without safety guards in
place.
• Do not make any equipment repairs while the conveyor is running.
• Keep hands, hair, and clothing clear of any moving parts.
• Never attempt to clear load jams while the equipment is running.
• Always use appropriate tools when making repairs or adjustments.
• Observe all warning labels and follow plant safety rules.
• Make sure all connectors are secure and all wires are free from interference,
obstruction, and any moving parts.
4.3 Conveyor Roller Replacement
When servicing P&D conveyor, refer to this manual for the roller section and the Full
Width Belt Service and Repair Manual for the full width belt sections.
To Next Page
