Honeywell N4680 - Page 217

N4680 2D Decoded Scan Engine User Guide 197
NEC 2 of 5 Default All NEC
2 of 5 Settings
N25DFT 95
Off N25ENA0 96
*On N25ENA1 96
NEC 2 of 5 Check Digit *No Check Char. N25CK20 96
Validate, But Don’t
Transmit
N25CK21 96
Validate, and Transmit N25CK22 96
NEC 2 of 5 Message Length Minimum (2 - 80) *4 N25MIN## 96
Maximum (2 - 80) *80 N25MAX## 96
NEC 2 of 5 Redundancy Range (0-10) *0 N25VOT## 97
Code 93 Default All Code 93
Settings
C93DFT 97
Off C93ENA0 97
*On C93ENA1 97
Code 93 Message Length Minimum (0 - 80) *0 C93MIN## 98
Maximum (0 - 80) *80 C93MAX## 98
Code 93 Redundancy Range (0-10) *0 C93VOT## 98
Code 93 Append On C93APP1 98
*Off C93APP0 98
Code 93 Code Page Code 93 Code Page C93DCP 99
Straight 2 of 5 Industrial Default All Straight 2 of 5 Industrial
Settings
R25DFT 99
*Off R25ENA0 99
On R25ENA1 99
Straight 2 of 5 Industrial Message
Length
Minimum (1 - 48) *4 R25MIN## 99
Maximum (1 - 48) *48 R25MAX## 99
Straight 2 of 5 Industrial Redundancy Range (0-10) *0 R25VOT## 100
Straight 2 of 5 IATA Default All Straight 2 of 5 IATA
Settings
A25DFT 100
*Off A25ENA0 100
On A25ENA1 100
Straight 2 of 5 IATA Message Length Minimum (1 - 48) *4 A25MIN## 100
Maximum (1 - 48) *48 A25MAX## 100
Straight 2 of 5 IATA Redundancy
Range (0-10) *0 A25VOT## 101
Matrix 2 of 5 Default All Matrix 2 of 5
Settings
X25DFT 101
*Off X25ENA0 101
On X25ENA1 101
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Page