Honeywell N4680 - Page 219

N4680 2D Decoded Scan Engine User Guide 199
Telepen Redundancy Range (0-10) *0 TELVOT## 108
UPC-A Default All
UPC-A Settings
UPADFT 108
Off UPBENA0 109
*On UPBENA1 109
UPC-A Check Digit Off UPACKX0 109
*On UPACKX1 109
UPC-A Number System Off UPANSX0 109
*On UPANSX1 109
UPC-A Redundancy Range (0-10) *0 UPAVOT## 109
UPC-A 2 Digit Addenda *Off UPAAD20 110
On UPAAD21 110
UPC-A 5 Digit Addenda *Off UPAAD50 110
On UPAAD51 110
UPC-A Addenda Required *Not Required UPAARQ0 110
Required UPAARQ1 110
Addenda Timeout Range (0-65535) *100 DLYADD#### 111
UPC-A Addenda
Separator
Off UPAADS0 111
*On UPAADS1 111
UPC-A/EAN-13 with Extended Coupon
Code
*Off CPNENA0 111
Allow Concatenation CPNENA1 111
Require Concatenation CPNENA2 112
Coupon GS1 DataBar Output GS1 Output Off CPNGS10 112
GS1 Output On CPNGS11 112
UPC-E0 Default All UPC-E
Settings
UPEDFT 112
Off UPEEN00 112
*On UPEEN01 112
UPC-E0 Expand *Off UPEEXP0 113
On UPEEXP1 113
UPC-EO Redundancy Range (0-10) *0 UPEVOT## 113
UPC-E0 Addenda Required Required UPEARQ1 113
*Not Required UPEARQ0 113
UPC-E0 Addenda Separator *On UPEADS1 114
Off UPEADS0 114
UPC-E0 Check Digit Off UPECKX0 114
*On UPECKX1 114
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Page