Honeywell SmartLine RMA800 - 5 Rma803 Ff Remote Indicator Configuration; Importing the RMA803 FF Device Description (DD) Files; Importing the DD to Experion PKS

Page 28 Foundation Fieldbus RMA803 Remote Indicator User's Guide Revision 4
5. RMA803 FF Remote Indicator Configuration
ATTENTION
Additional Function blocks are available post liscensing.
5.1 Importing the RMA803 FF Device Description (DD) files
Importing the DD to Experion PKS
ATTENTION
Experion release compatibility
Experion Release DD Compatibility
430 Yes
410.4 Yes
400.4 + CP3 Yes
311.3 Yes
The steps in the following procedure are specific to Experion R410 only.
Step
Action
1
From the Control builder main screen, click Fieldbus Device Description
Import .
OR
Select File > New > Type >Fieldbus Device
2
You can Import the DD using one of the following steps:
• Choose Browse to locate the folder where you have stored the DD
file.
• Select the required folder, and click OK.
• Select the DD from the Device List, and click OK.