3 Transportation & Storage
Linear actuators MC55
10 Version 3.3 - November 2014 Operating Manual
2.5 Type plate
The type plate is attached to the housing of the linear actuator.
It bears the type denomination, serial number (s/no) and date of manufacture (last
four digits).
2.1 Component parts on page 6
3 Transportation & Storage
Non-compliance with safety regulations may result in injury!
• Wear the required personal and other safety equipment.
• Avoid impacts, blows, vibrations etc. to the linear actuator.
• Store the linear actuator (and, where appropriate, the entire controlling device)
in a dry place.
• Keep to the specified transport and storage temperatures between -20 to
+65°C.
diagram 2 Example of type plate
MC55Y 08203017/01/0408
AC 50/60 Hz
max 3.5 VA
24V
IP 54/30
To Next Page
