3 Transportation & Storage
Linear actuators MC100 • MC103
Operating Manual Version 2.1 - March 2011 11
2.6 Type plate
The type plate is attached to the housing of the linear actuator.
It bears the type denomination, serial number (s/no) and date of manufacture (last
four digits).
2.1 Component parts on page 6
3 Transportation & Storage
Non-compliance with safety regulations may result in injury!
• Wear the required personal and other safety equipment.
• Avoid impacts, blows, vibrations etc. to the linear actuator.
• Store the linear actuator (and, where appropriate, the entire controlling device)
in a dry place.
• Keep to the specified transport and storage temperatures between -20 to
+65°C.
diagram 4 Example of type plate
MC100/24
F.-Nr.: 07204142/01/0607
AC 50 Hz 24 V
Y=0
…10 V DC
X=0…10 V DC
6VA
IP 54
S3-50% ED
1,0 kN
4s/mm
Stroke 20 mm