B-3
To determine which SCSI IDs are currently in use on your system,
use the ioscan command in a terminal window:
1. Click on the Terminal Control on the Front Panel of your
Workspace.
Terminal Control
A terminal window opens.
2. Move the mouse cursor into the terminal window and single-
click the left mouse button.
3. Enter the following at the prompt:
/usr/sbin/ioscan –f
Enter
After a few moments the ioscan utility lists all of the SCSI I/O
devices it could find. The list appears similar to the following:
Checking the
SCSI IDs
To Next Page
Loading...
