5-6
Table 5–4. Problems Using a Hard Disk Drive
Problem Solution
The disk drive is not
accessible or does
not respond.
If problems persist, contact your system administrator or call
your designated service representative.
Make sure that all SCSI devices are
set to the proper SCSI ID. (See Ap-
pendix C for default SCSI ID set-
tings.)
Check that all SCSI devices are cor-
rectly cabled. Check that the SCSI bus
is correctly terminated. (See Appendix
C for information on SCSI cabling
and termination.)
Make sure that the system can com-
municate with the drive as described
in “Checking the SCSI IDs” in Ap-
pendix B.
Follow the instructions in “Dealing
With a Boot Failure” later in this
chapter.
To Next Page
Loading...
Need help?
General
