HP 2240 - Unmounting a CD-ROM Disc Using SAM

2-17
Click on
O K
.
Now you can access the CD-ROM disc as you would any other
mounted file system.
Unmounting a CD-ROM Disc Using SAM
Use the following procedure to unmount a CD-ROM disc:
NOTICE: Before you unmount a CD-ROM disc, make
sure that your working directory (the directory
in which a relative path name search begins) is
set to some directory other than the one under
which the disc was mounted.
CAUTION: If you wish to use a CD-ROM disc as a
mounted file system, you must mount the CD-
ROM disc every time you load it into the drive.
You must also unmount the CD-ROM disc
every time you unload it from the drive. Failure
to mount or unmount a disc may cause a system
error condition and may also require rebooting
the system.
1. Log in as root. If you need information on logging in or setting
up a user account, see Using Your HP Workstation.
2. In a terminal window, enter the following command:
sam
Enter
3. The System Administration Manager window opens. Double-
click on Peripheral Devices –>.
4. The Peripheral Devices window opens. Double-click on Disks
and File Systems –>.