HP 2240 - Setting the Monitor Type

D-19
Setting the Monitor Type
You can set the monitor type for a graphics adapter by entering the
following:
Configuration Menu: Enter command > monitor graphics(n)
tt
Where n is the number of the graphics adapter and tt is the monitor
type.
To display a list of supported monitors, enter the following command:
Configuration Menu: Enter command > monitor list
A list of valid monitor types similar to the following is displayed:
MONITOR INFORMATION
Path Slot Head Type Size Freq Class
–––– –––– –––– –––– ––––––––– –––– –––––
GRAPHICS(0) 0 1 1 1280x1024 75Hz VESA
GRAPHICS(0) 0 1 2 1280x1024 75Hz VESA,Double
buffered
GRAPHICS(0) 0 1 3 1280x1024 75Hz VESA,Grey
scale
GRAPHICS(0) 0 1 4 1280x1024 75Hz VESA,Double
buffered,Greyscale
GRAPHICS(0) 0 1 5 1024x768 75Hz VESA
GRAPHICS(0) 0 1 6 800x600 75Hz VESA
GRAPHICS(0) 0 1 7 640x480 75Hz VESA
GRAPHICS(0) 0 1 8 1600x1200 75Hz VESA