2-2
This chapter provides an overview of the optional CD-ROM drive
and media, and describes how to use the CD-ROM drive. We assume
the CD-ROM drive is set to the factory default address of SCSI ID 2.
The instructions in this chapter assume you are using the HP-UX
version 10.20 or later operating system with the HP VUE version 3.0
interface.
NOTICE: Be sure you have read and understand the
information on mounting and unmounting
CD-ROM discs before you begin using your
CD-ROM disc drive.
NOTICE: Some procedures in this chapter require you to
log in as root. If you cannot log in as root, con-
tact your system administrator.
To Next Page
Loading...
