3-11
After a few moments the ioscan utility returns a message similar to
the following:
H/W Path Class Description
============================================
bc
8 bc I/O Adapter
8/12 ba Core I/O Adapter
8/12/5 ext_bus Built-in SCSI
8/12/5.3 target
8/12/5.3.0 tape HP HP35480A
If ioscan does not see any SCSI drives it will return the following
message:
ioscan: No hardware found
If you receive this message, go to Chapter 5, “Solving Problems.”
To Next Page
Loading...
