HP 53131A Operating Guide

Chapter 2 Operating Your Universal Counter
Front Panel Display Messages
2-76 Operating Guide
2
1
If this condition recurs, your Counter may need servicing.
OFFS 2 FAIL You have invoked the OFFS 2 ? choice from the Calibration menu item CAL: ,
and the calibration failed.
OFFS 2 PASS You have invoked the OFFS 2 ? choice from the Calibration menu item CAL: ,
and the calibration passed.
NO GATE MENU You currently have the VOLT PEAKS function selected and requested the Gate &
Ext Arm menu.
NO LIM MENU You currently have the VOLT PEAKS or TOTALIZE function selected and
requested the Upper & Lower or Limit Modes menu.
NO MATH MENU You currently have the VOLT PEAKS or TOTALIZE function selected and
requested the Scale & Offset menu.
NO REGISTERS There are no registers which can be recalled and you selected the Recall menu.
NO STAT MENU You currently have the VOLT PEAKS or TOTALIZE function selected and
requested the Stats menu.
NO TRIG MENU You currently have the VOLT PEAKS function selected and requested the
Trigger/Sensitivity menu.
1
RECALL FAIL You have requested the Counter to perform a recall (from the Recall menu) and a
hardware failure has resulted.
1
SAVE FAIL You have requested the Counter to perform a save (from the Save & Print menu)
and a hardware failure has resulted.
TB CAL FAIL You have invoked the TIMEBAS? choice from the Calibration menu item CAL: ,
and the calibration failed.
TB CAL PASS You have invoked the TIMEBAS? choice from the Calibration menu item CAL: ,
and the calibration passed.
TI CAL FAIL You have invoked the TI QUIK? or TI FINE? choice from the Calibration menu
item
CAL: , and the calibration failed.
TI CAL PASS You have invoked the TI QUIK? or TI FINE? choice from the Calibration menu
item
CAL: , and the calibration passed.
Table 2-5. Menu Messages (continued)
Display Message Description

HP 53131A Specifications

General

Brand	HP
Model	53131A
Category	Cash Counter
Language	English