HP 53131A Operating Guide

Chapter 2 Operating Your Universal Counter
Using Entry/Select (Arrow) Keys
Operating Guide 2-9
2
To Use During State Changing (ON/OFF, LO/MED/HI,
etc.)
•Press any of the arrow keys to toggle or change to the next state of the
parameters found in the following menus:
–Gate & ExtArm
–Limit Modes
– Scale & Offset
–Stats
– Trigger/Sensitivity
–50
Ω
/1M
Ω
– DC/AC
– X10 Attenuate
– 100kHz Filter
–Save & Print
– Utility Menu
•The Enter and +/
−
keys are ignored during the state changing
operating mode.
To Use on Prompted Event Messages (SET OFFSET ?,
CAL: OFFS n ?, TEST: ALL?, etc.)
•For SET OFFSET ? , and all the TEST: ? prompted event messages,
press Enter key to start the event.
•For
CAL: OFFS n ? and GAIN n ? , press Enter key to display
instructions. Press Enter key again to start the event.
To Use on Prompted Help Messages (MATH HELP ?,
PRINT HELP ?)
•When MATH HELP ? is displayed, press Enter key to display the
“
(MEAS x SCALE) + OFFS = RESULT ” message.
•When
PRINT HELP ? is displayed, press Enter key to display the
“
CONFIGURE PORT ON UTILITY MENU; REMEMBER TO SAVE
SETUP FIRST
” instruction.

HP 53131A Specifications

General

Brand	HP
Model	53131A
Category	Cash Counter
Language	English